A new 1D hybrid fluoroaluminate templated by an original tetramine

An original polyamine, 2,3 di-2-aminomethyl 1,4 diaminobut-2-ene (ten), characterized by single-crystal XRD analysis, has been synthesised and leads to a new hybrid fluoroaluminate [H₄ten] · (AlF₅)₂ by microwave heating assisted hydrothermal synthesis. The structure of [H₄ten] · (AlF₅)₂ is ab initio determined from powder data.     

Identification of twenty amino acids by circular thin-layer chromatography

Summary A method has been developed for the separation and identification of 20 common amino acids by circular thin-layer chromatography. The amino acids are separated to neutral, acid, and basic groups by electrolysis and then identified by circular TLC. The method is simple and development of a chromatoplate is complete in about 3 minutes. The application of the method is illustrated by the analysis of amino acids in foods and in urine.

---

Zusammenfassung Zur Trennung und Identifizierung 20 gewöhnlicher Aminosäuren wurde ein chromatographisches Verfahren entwickelt. Die Aminosäuren werden elektrolytisch in neutrale, basische und saure getrennt und dann auf kreisförmiger Dünnschichte chromatographiert. Die Entwicklung des Chromatogramms ist in 3 Minuten beendet. Die Anwendung zur Analyse von Lebensmitteln und Harn wird beschrieben.

     

Magnetic dye affinity beads for the adsorption of beta-casein

Casein is well known as a good protein emulsifier and beta-casein is the major component of casein and commercial sodium caseinate. Dye affinity adsorption is increasingly used for protein separation. beta-Casein adsorption onto Reactive Red 120 attached magnetic poly(2-hydroxyethyl methacrylate) (m-PHEMA) beads was investigated in this work. m-PHEMA beads (80-120 microm in diameter) were produced by dispersion polymerization. The dichlorotriazine dye Reactive Red 120 was attached covalently as a ligand. The dye attached beads, having a swelling ratio of 55% (w/w) and carrying different amounts of Reactive Red 120 (9.2 micromol . g(-1)-39.8 micromol . g(-1)), were used in beta-casein adsorption studies. The effects of the initial concentration, pH, ionic strength and temperature on the adsorption efficiency of dye attached beads were studied in a batch reactor. The non-specific adsorption on the m-PHEMA beads was 1.4 mg . g(-1). Reactive Red 120 attachment significantly increased the beta-casein adsorption up to 37.3 mg . g(-1). More than 95.4% of the adsorbed beta-casein was desorbed in 1 h in a desorption medium containing 1.0 M KSCN at pH 8.0. We concluded that Reactive Red 120 attached m-PHEMA beads can be applied for beta-casein adsorption without significant losses in the adsorption capacities.     

Interaction of lead atom with atmospheric hydroxyl radical. An ab initio and density functional theory study of the resulting complexes PbOH and HPbO

The two potential hypersurfaces 2A' (ground state) and 2A" (excited state) have been studied through ab initio and density functional theory (DFT) methods for the Pb(OH) complex. Two processes have been identified. The first one concerns the hydrogen inversion process in the coordination of PbOH and the second one the isomerization of PbOH into HPbO. Eight stationary points have been found; four of them correspond to the stable structures with symmetries PbOH(2A'), PbOH(2A"), HPbO(2A'), and HPbO(2Pi), and four correspond to transition states [TS] with the symmetries 2Pi, 2A', 2Sigma+, and 2A". The hydrogen inversion process in PbOH exhibits the so-called Renner-Teller effect with a rather low barrier, whereas the isomerization process PbOH-->HPbO exhibits a rather high barrier. The energetic, structural, spectroscopy, and thermodynamics results obtained at various levels through, e.g., DFT with BLYP, B3LYP exchange-correlation functionals, coupled clusters methods, namely CCSD (single and double excitations) and CCSD(T) (with triple excitations, by perturbation) are presented for the whole sets of the stationary points and their dissociation products. The relativistic effects, as well as spin-orbit interaction, taken into account in the case of the BLYP exchange-correlation functional, have been estimated and discussed in order to measure their importance in the case of system including heavy metals such as Pb. Reactions of lead (Pb) with oxidizing atmospheric molecules (OH, HO2, O2, and O3) have been studied at various levels of approximation in order to study the possible existence of PbOH in the atmosphere.     

Ultrasound assisted pseudo-digestion of street dust samples prior to determination by atomic absorption spectrometry

A sample preparation method based on ultrasound assisted pseudo-digestion of Pb, Cu, Zn and Ni from street dust samples under ultrasonic effect has been described. Parameters influencing pseudo-digestion, such as sonication time, sample mass, particle size and solvent system were fully optimized. Final solutions obtained upon sonication were analyzed by atomic absorption spectrometry. The best conditions for metal pseudo-digestion were as follows: a 25 min sonication time, a 0.3 g sample mass (in 25 ml solvent), a particle size <63 μm and a mixture of concentrated HNO₃-HClO₄-HF (2:1:1, v/v/v). Analytical results for the four metals by ultrasound assisted pseudo-digestion, acid bomb and conventional wet digestion methods showed a good agreement, thus indicating the possibility of using mild conditions for sample preparation instead of intensive treatments inherent with the digestion methods. In addition, this method reduces the time required for all treatments (pseudo-digestion or digestion, heating to dryness, cooling and separation) with acid bomb and conventional wet digestion methods approximately from 9 to 1 h. The accuracy of the method was tested either by comparing obtained results with those of acid bomb and conventional wet digestion methods or by application on two standard reference materials. The average relative standard deviation of ultrasound assisted pseudo-digestion method varied between 0.9 and 1.8% for N = 12, depending on the analyte.     

A new synthesis of vitamin C

l-Arabinose was reduced to l-arabinitol and condensed with formaldehyde to give two bis(di-0-methylene-l-arabityloxymethane and two di-O-methylene-l-arabinitol derivatives. Cis-fused 1,3:2,4-Di-O-methylene-l-arabinitol and trans-fused 2,4:3,5-Di-O-methylene-l-arabinitol were also isolated; only the former was affected by the oxidation to give the corresponding aldehyde, which was converted successively to the hydroxy amide, the ethyl hydroxy ester, the corresponding keto ester and vitamin C.     

Preparation,characterization, and binding profile of imprinted semi-IPN cryogel composite for aluminum

Human body is greatly exposed to aluminum due to its high abundance in the environment. This nonessential metal is a threat to the patients of chronic renal disorders, as it is easily retained in their plasma and quickly accumulates in different tissues. Thus, there is great need to remove it from the aqueous environment. In this study, Al³⁺ imprinted semiinterpenetrating polymer network (semi-IPN)-based cryogel composite was prepared and applied for the purification of environmental and drinking water samples from aluminum. Poly (2-hydroxyethyl methacrylate) (pHEMA) discs were produced via cryogenic treatment and imprinted semi-IPN was introduced to the 3-(trimethoxysilyl) propyl acrylatemodified macroporous cryogel discs. The adsorption properties and selectivity of the aluminum (III) imprinted semi-IPN cryogel composite were studied in detail. The imprinted semi-IPN cryogel composite showed good selectivity towards aluminum (III) ions with the imprinting factor (IF) of 76.4 in the presence of competing copper (II), nickle (II), and iron (III) ions. The maximum adsorption capacity of 271 μmol g^-1 was obtained for aluminum (III) at pH 7.0 within 10 min using imprinted semi-IPN cryogel composite. The good selectivity and reusability of aluminum (III)-imprinted semi-IPN cryogel composite makes this material an eligible candidate for the purification of drinking water from aluminum (III) leaving important minerals remained in the water.     

DFT and TD-DFT calculations on thieno[2,3-b]indole-based compounds for application in organic bulk heterojunction (BHJ) solar cells

Research on Chemical Intermediates - Eight novel organic compounds with donor–π–acceptor (D–π–A) structure were designed for use as donors in organic bulk...     

Crystal structure of bis(triphenylphosphine) bis(N,N′-dibutylthiourea)silver(I) nitrate

A mixed-ligand silver(I) complex of triphenylphosphine and N,N′-dibutylthiourea (Dbtu), [Ag(Ph₃P)₂(Dbtu)₂]NO₃, is prepared and its structure in the solid state is determined by X-ray crystallography. X-ray structure of this complex shows that it is mononuclear with the silver atom coordinated by two PPh₃ and two dibutylthiourea ligands adopting a distorted tetrahedral geometry. The crystal structure shows the formation of 1-D chains through intermolecular hydrogen bonding interactions between N-H of Dbtu and nitrate ions. The new complex is also characterized by IR and NMR (¹H and ³¹P) spectroscopy. The spectroscopic data are discussed in terms of the nature of bonding. A similar mixedligand complex is also prepared for tetramethylthiourea (Tmtu), but the structure of the resulting compound shows that it is a bis(phosphine) complex, [Ag(PPh₃)₂NO₃] rather than a mixed-ligand complex.